Good outcome without anyone ever seeing the hands move if our hands are held correctly on the reins and we’re effective with our half halts that position where our fingers do more of the talking than our hands hey guys it’s Meg and welcome back to my channel so for today’s video I am going to be shooting the very highly requested video that is how to make parascending so if you guys are interested unknowing how I made these and you want to make a pair for yourself then make surety keep watching.
Before you do anything you’re going horse reins to want to choose how thick you are going to do your rings so toucan make them with either six strands accordance or nine strands of para cord Usually go with nine just because I like the feel of a thicker rein but if you don’t care you can go six as well it uses less para cord then comes the nonparticipating your para cord colors so I went with some pretty bright and crazy colors I went with this rainbow firework one yellow a pink a turquoise and a lime green you can choose really.
whatever colors you want if you want to match your color theme with your horse or if you’re feeling kind of crazy choose whatever you want once you have chosen your colors it is time to measure and cut when measuring and cutting counterpart you’re going to want to double the actual length you want it this package I got came with sixteen feet and I kind of wanted mine around like feet so I pretty much used this entire lengths my guide once you have chosen howling you want your para cord go ahead and take a measuring tape and measure double that length and then go ahead and cut that so here I measured out the length compared to the package one I bought and then I went head.
Valve there this dislike a little box that’s in the wall toucan see it on the wall it’s a nice little shrink trimmed out box and then what you do you you just glue a piece of two-inch pipe on heroes you would then just there’s a little fitting on here you just solvent glue on piece of -inch pipe and you’d have tout a trap below it a glue trap and and that’s all there is to install on one of these it’s pretty simple using one of those boxes you can also just have the pipe go up the wall and put the trap and leave it there like this.
In a base mentor something but these little boxes look nice and most people now putting laundry machines up you know upstairs and finish room so you want it to be in Sheetrock and have it look good toilets toilets with a toilet there’s too rough in a toilet let’s say we’re looking down on the floor this is the wall and of course this is the floor there’s a couple of code things for toilets too which which I’ll tell you about but to install to roughen for toilet you need a flange adapter which is this is an offset one and on that long pipe wherever I put it then that’s already glued that’s not an offset so you can you can get either an offset one or not offset.
one and again this is how I like to do them I would just you want to come out and there’s gonna be a piece of Sheetrock on here remember the distance is not that critical but you would come out inches from the wall this is for most toilets check your toilet they have toilets that are like inches and some that are more but most common toilets are standard inches out you would drill your hole centered inches out by code that hole has to be at least inches from any sidewall so it has to be just the toilet space has to be at least inches wide and it’s better to be like inches you know if you can give or inches neither side it’s better with folks that are a little bit heavier gives it little bit more room no comment and then to the front of the bowl once the toilets you know mounted from the ball to the wall over here is supposed to be minimum inches so that you’d have.